Author: Tauqeer Ul Hassan
A garden gate or side gate demarks the border between private and public areas of a home. It is meant for keeping kids or pets in the backyard where they belong and strangers outside for maintaining privacy and safety. However elbow grease is needed to assemble one, learning to build a gate is really quite simple.
A gate that is installed at the side of the house or as an entrance into the garden is generally 6 feet high. It must be constructed of weather resistant materials and corrosion resistant hardware for enduring the vagaries that weather presents. Using the correct material will also prevent gate posts from weakening and wearing or tearing.
Grow Rooms
Posts for a size of 6 feet tall gate are generally 5?x5? lumber and cut to a suitable height. Further, the posts have to be bolted to another fixed structure or can be held up at the top with a header or beam for stabilizing them. Posts can also act like walk-through structures like a pergola or arbor. The holes into which the posts are concreted should have a size of 2 feet deep and 1 foot squared. Extra support can be provided by running a timber or concrete bridge below ground level between the two posts for keeping them straight.
LEGO mindstorms nxt sale
For determining the gate's width, it has to be proper and granted enough clearance on either side of the gate. 1 inch has to be deducted from the width between the two posts that have been set up. This will allow a half inch of clearance. The gate's frame (2 long sides and 2 short sides) should be constructed on level ground from 2?x3? pieces of lumber. A fifth piece of lumber that is cut to fit between the 2 long sides is to be used in order to know how to build a gate with a strong frame.
long distance relationship advice
The frame of the gate must be squared by adjusting the frame until the two opposite diagonal measurements become identical. This will ensure the corners of the frame to be at right angles and the frame is square. A piece of 2?x3? lumber is used for supporting the frame that is laid slantwise from corner to corner and tied with the help of galvanized nails. The gate's vertical boards have a size of 1?x6? fence boards and they have to be nailed with the frame using 2.5 inch galvanized nails that are flat headed for stability. These must equally overhang the top and bottom of the frame while lying flush with its edges. The width of the last board has to be cut for maintaining the flush fit. The gate is hung between its posts so that it sits 2 inches of the ground.
d5000 review
The gate has to be jammed in place with wedges or packers while the hinges are installed. Hinges have to be installed on the inside of the gate if it has to be opened inwards and vice versa. The wedges can be removed when the hinges are installed, now the gate latch can be finally fitted.
Article Source: http://www.articlesbase.com/home-improvement-articles/building-a-garden-gate-1991341.html
About the Author
Also learn, how to build a gate and how to build stairs
.